联系人:魏经理
电话:15165311861
手机:15165311861 15853170198
地址:济南市标山南路绿地东门
当前位置:首页-行业动态行业动态
玻璃隔断的玻璃规格有哪些?
作者:admin 来源:本站 发布时间:2018-05-25 16:20:31 浏览次数:98
      玻璃,一种较为透明的固体物质,在熔融时形成连续网络结构,冷却过程中粘度逐渐增大并硬化而不结晶的硅酸盐类非金属材料。
    Glass, a relatively transparent solid substance that forms a continuous network structure during the melting process, and increases the viscosity of the silicate, which is hardened and not crystallized, during the cooling process.
    玻璃隔断有很多种样式,热熔玻璃隔断、浮雕玻璃隔断、锻打玻璃隔断、精彩玻璃隔断、琉璃玻璃隔断、夹丝玻璃隔断、玻璃马赛克隔断、无影胶玻璃隔断等。
    There are many types of glass partition, hot melting glass partition, relief glass partition, forged glass partition, brilliant glass partition, glazed glass partition, glass partition, glass mosaic partition, shadowless glass partition and so on.
    1、玻璃隔断的玻璃规格:
    1. Glass specifications separated by glass:
    3--4厘玻璃隔断,主要用于画框表面。

    insulating glass is used mainly for the surface of the frame.

济南玻璃镜片

    5--6厘玻璃隔断,主要用于外墙窗户、门扇等小面积透光造型等等
    glass partition, mainly used for exterior windows, door fans and other small area translucent modeling, etc.
    7--9厘玻璃隔断,主要用于室内屏风等较大面积但又有框架保护的造型之中。
    glass partition, mainly for indoor screens and other large areas, but also with frame protection.
    9--10厘玻璃隔断,可用于室内大面积隔断、栏杆等装修项目。
    glass partition can be used for indoor large area partition, railings and other decoration projects.
    11--12厘玻璃隔断,可用于地弹簧玻璃门和一些活动人流较大的隔断之中。
    glass partition, can be used for ground spring glass doors and some activities larger pedestrian partition.
    15厘以上玻璃隔断,一般市面上销售较少,往往需要订货,主要用于较大面积的地弹簧玻璃门外墙整块玻璃墙面。
    More than 15 of the glass partition, generally sold less on the market, often need to order, mainly used for large area of floor spring glass door exterior wall glass block.
    2、玻璃隔断施工注意:
    glass partition construction attention:
    玻璃安装时,玻璃周边不得有缺陷。
    When glass is installed, there shall be no defects around the glass.
    玻璃不得直接与各种型材接触,必须设置橡胶类支承垫块和定位垫块,严禁使用木质垫块。
    Glass must not be directly contacted with all kinds of profiles. Rubber bearing blocks and positioning blocks must be set up, and wooden blocks shall not be strictly prohibited.
    固定玻璃的钉子或卡件以及压条的固定点间距均不得大于300mm,且每块玻璃不少于8个固定点。
    The spacing between fixed points and fasteners of fixed glass and layering shall not be greater than 300mm, and each piece of glass must be no less than 8 fixed points.
    采用密封胶进行密封处理时,应选用中性硅酮密封胶,其注胶厚度不应小于5mm。
    Neutral silicone sealant should be used when sealant is used for sealing treatment. The injection thickness should not be less than 5mm.
    本文由济南玻璃镜片提供分析,更多的详细精彩内容请点击我们的官方网站http://www.jnkdblgd.com/。