作为感应门的控制装置，感应门控制器如果损坏就会导致感应门停门无法运行，那么你知道感应门控制器如何正确接线吗？在接线时又有哪些注意事项吗？今天门道佰分佰小编就根据日常维修感应门控制器的经验为大家简单介绍一下。

As the control device of the induction door, if the induction door controller is damaged, it will cause the induction door to stop and cannot operate. Do you know how to correctly connect the induction door controller? Are there any precautions when wiring? Today, doorway Baifen Xiaobian will give you a brief introduction based on the experience of daily maintenance of sensitive door controller.

怎么安装自动感应门？

How to install automatic induction door?

感应探测器探测到有人进入时，感应探测器将收集信号，生成脉冲信号，其后脉冲信号传给主控器，主控器判断后通知马达运行，同时监控马达转数，以便通知马达在一定时候加力和进入慢行运行。马达得到一定运行电流后做正向运行，将动力传给同步带，再由同步带将动力传给吊具系统使门扇开启;门扇开启后由控制器作出判断，如需关门，通知马达作反向运动，关闭门扇。

When the induction detector detects someone entering, the induction detector will collect signals and generate pulse signals, which will then be transmitted to the main controller. The main controller will notify the motor to run after judging, and monitor the motor revolution at the same time, so as to inform the motor to apply force and enter slow operation at a certain time. After the motor receives a certain operating current, it operates in a positive direction and transmits the power to the synchronous belt, which then transmits the power to the spreader system to open the door leaf; After the door leaf is opened, the controller makes a judgment. If it is necessary to close the door, inform the motor to move in the opposite direction and close the door leaf.

自动感应门怎么接线的？

How is the automatic sensing door wired?

自动门感应器一般有七个部件，分别是皮带张紧轮部件、接线架装置、动力梁、通用调节型吊架、微电脑智能控制系统、动力装置、皮带部件。在接线时要先将原配线插在感应器里，感应器中有一个插座，插好即可。然后将线的另一头连接在端子另一边。连接时注意线的颜色，相同颜色的是信号线，不同颜色的是电源线。安装好之后，将自动门感应器固定在门框上，距离地面高度不低于2.5米。

The automatic door sensor generally has seven components, including belt tensioner, wiring rack device, power beam, general adjustable hanger, microcomputer intelligent control system, power device and belt component. When wiring, insert the original wiring into the sensor first. There is a socket in the sensor. Just plug it in. Then connect the other end of the wire to the other side of the terminal. Pay attention to the color of the line when connecting. The signal line with the same color and the power line with different colors. After installation, fix the automatic door sensor on the door frame, and the height from the ground shall not be less than 2.5 meters.

如果济南感应门安装了辅助光线传感器(红外对射保护装置)，当自动门门扇打开时，人站着不动，用手遮挡辅助光线传感器，门应该保持打开状态。当手离开后几秒内，门应该重新关闭。

If the Jinan induction door is equipped with an auxiliary safety light sensor (infrared radiation protection device), when the automatic door leaf is opened, people stand still and block the auxiliary safety light sensor with their hands, the door should remain open. The door should be closed again within a few seconds after the hand leaves.

感应门安装一定要选择有实力和丰富经验的安装公司进行施工，因为感应自动门安装具有易学难精的特点，没有丰富的安装经验，感应门运行时经常会有这样或那样的缺陷，而且通常难以，同时也难以保正有完善的售后服务。更多相关内容就来我们网站http://www.jnkdblgd.com咨询吧！

The installation of induction doors must be carried out by a professional installation company with strength and rich experience, because the installation of induction automatic doors is easy to learn and difficult to refine. Without rich installation experience, induction doors often have one or another defects when running, which are usually difficult to eliminate, and it is also difficult to ensure perfect after-sales service. Come to our website for more relevant content http://www.jnkdblgd.com Consult!