您好,欢迎访问济南凯达玻璃隔断有限公司 网站

全国咨询热线:

400-9968-996

当前位置:首页>新闻资讯>公司新闻>有关肯德基门故障的详细分析

有关肯德基门故障的详细分析

文章出处:http://www.jnkdblgd.com/ 人气: 发表时间:2022-08-03
无论是哪种门在被使用的期间或多或少都会发生小问题,因为门也需要进行定期的维护以及保养,那么济南肯德基门在被应用的时候也不例外,下面针对有关肯德基门故障的详细分析。
No matter what kind of door is used, small problems will occur more or less, because the door also needs regular maintenance, so Jinan KFC door is no exception when it is used. The following is a detailed analysis of KFC door faults.
肯德基门闭合不紧密
KFC door is not closed tightly
肯德基门开启后,门扇闭合不严密,有宽度0.1cm以上的缝隙。这种情况产生原因主要由于闭门器使用频繁、维护不及时或者闭门器本身质量问题都会产生这种情况。如果是前两个原因造成的可以通过调闭门器关闭力度以达到维修目的,如果是产品质量问题通过更换闭门器即可解决。
After the KFC door is opened, the door leaf is not tightly closed, and there is a gap with a width of more than 0.1cm. This situation is mainly caused by frequent use of the door closer, untimely maintenance or quality problems of the door closer itself. If it is caused by the first two reasons, it can be repaired by adjusting the closing force of the door closer. If it is a product quality problem, it can be solved by replacing the door closer.
肯德基门门扇下垂
KFC door leaves droop
肯德基门门扇下垂,出现摩擦地面的现象。这种情况可以从地轴寻求解决方法。安装技术不到位、地轴承重量小于门扇重量、地轴本身质量问题都会产生这种情况。如果是后两个原因造成的,只能通过更换地轴解决问题,如果是因为安装技术问题导致的,可以通过砸地轴以达到维修目的。图片
KFC door leaves droop, causing friction with the ground. This situation can be solved from the earth axis. This can happen if the installation technology is not in place, the weight of the ground bearing is less than the weight of the door leaf, and the quality problem of the ground shaft itself. If it is caused by the latter two reasons, the problem can only be solved by replacing the ground shaft. If it is caused by installation technical problems, the ground shaft can be smashed to achieve the purpose of maintenance. picture
济南肯德基门
当肯德基门门扇出现了下垂现象的时候可能是由于安装该门的时候技术不到位,还有地面承周边的重量小于门扇的重量,以及地轴本身就有质量问题,不足以支撑门的运转以此造成了在开关的时候会有摩擦地面的现象出现。除此之外还有一种可能就是调节螺丝因退丝造成门下垂。在出现上述的故障之后就可以首先对地轴进行检查,以便更快的找出问题,方便肯德基门后续的正常使用。
When the KFC door leaf sags, it may be because the technology is not in place when installing the door, the weight around the ground bearing is less than the weight of the door leaf, and the ground shaft itself has quality problems, which is not enough to support the operation of the door, resulting in the phenomenon of rubbing the ground when opening and closing. In addition, there is another possibility that the adjusting screw causes the door to droop due to thread withdrawal. After the above-mentioned faults occur, you can first check the ground axis, so as to find out the problems faster and facilitate the subsequent normal use of KFC gate.
我们在维修肯德基门的过程中,发现还有一种常见的因素导致的门下垂,就是调节螺丝因退丝造成门下垂,探索的维修办法是通过用内六角扳手调节两边的地轴达到门的升降,顺时针为上升,逆时针为下降,用这种方法对门进行维修,避免更换配件,有效降低了运维成本。
In the process of repairing KFC doors, we found that there is another common factor leading to door sagging, that is, the door sagging caused by the withdrawal of the adjusting screw. The maintenance method we explored is to use an Allen wrench to adjust the floor shafts on both sides to achieve the lifting and lowering of the door, clockwise for rising, counterclockwise for falling. This method is used to repair the door, avoid replacing accessories, and effectively reduce the operation and maintenance cost.
肯德基门是一种常用于人流聚集地方的门,这种门可以帮助店门分散人流,同时从外观上来说也具有很好的装饰效果,所以现在大型的建筑以及高层的建筑很常见,您有安装维修需求的话欢迎来我们网站http://www.jnkdblgd.com咨询。
KFC door is a kind of door commonly used in places where people gather. This kind of door can help store doors disperse people. At the same time, it also has a good decorative effect from the appearance, so now large buildings and high-rise buildings are very common. If you need installation and maintenance, please come to our website http://www.jnkdblgd.com consulting service