您好,欢迎访问济南凯轩鹏宇玻璃有限公司 网站

全国咨询热线:

400-9968-996

当前位置:首页>新闻资讯>公司新闻感应门使用的基本条件及注意事项

感应门使用的基本条件及注意事项

文章出处:http://www.jnkdblgd.com/ 人气: 0 发表时间:2022-09-17
济南感应门想要正常使用需要符合一定的基本条件,只有这些基本条件均达标才能保证感应门可以使用并且对设备不会产生损坏,还有一点就是在使用时需要注意一些事。下面小编来讲讲吧。
Jinan induction door needs to meet certain basic conditions if it is to be used normally. Only when these basic conditions are up to standard can the induction door be used without damage to the equipment. Another point is that you need to pay attention to something when using it. Let's talk about it.
感应门使用基本条件:
Basic conditions for use of induction door:
1.感应门对电源要求,AC220V50HZ地线可靠接地。
1. The induction door is required for power supply, and the AC220V 50HZ ground wire is reliably grounded.
2.感应门对温度要求-20°C--+35°C。
2. The temperature of induction door shall be - 20 ° C -+35 ° C.
3.感应门对相对湿度要求≤80%。
3. The relative humidity of induction door shall be ≤ 80%.
4.感应门不可承受雨淋。
4. The sensing door shall not withstand rain.
5.感应门10米规划内不得有高温热源及剧烈震源。
5. There shall be no high temperature heat source and severe earthquake source within the 10m plan of the induction door.
6.感应门不应受腐蚀气体腐蚀。
6. The induction door shall not be corroded by corrosive gas.
7.感应门不可承受剧烈冲击。
7. The induction door shall not withstand severe impact.
8.感应门附近不得有剧烈电气干扰及磁场干扰。
8. There shall be no severe electrical interference and magnetic field interference near the induction door.
感应门使用注意事项:
Precautions for use of induction door:
1.为避免电击危险,在设备、移动或翻开本产品电气设备或门体外盖时,请正确运用接地设备和断开电源。电源线应接入有可靠接地的电源开关傍边,电源电压有必要符合本手册要求。
1. In order to avoid the danger of electric shock, please properly use the grounding equipment and disconnect the power supply when the equipment, moving or opening the electrical equipment or the external cover of the door. The power line shall be connected to the side of the power switch with reliable grounding, and the power supply voltage must meet the requirements of this manual.
2.为保证感应门的正确运用,在运用和操作维护时有必要遵照厂家的有关要求进行。若感应门产生缺点,应按手册的要求进行操作,并当即奉告嘉鑫门业感应门联络修补。
2. In order to ensure the correct use of the induction door, it is necessary to follow the relevant requirements of the manufacturer during the operation and maintenance. If the sensor door has defects, it shall be operated according to the requirements of the manual and Jiaxin Door Industry shall be informed immediately to contact the sensor door for repair.
济南感应门
3.感应门运用进程中,请遵照感应门危险标志,不得在内部逗留,嬉闹,儿童应有成年人伴随快速经过。对任何误入误用自动旋转门而构成直接或直接损害及丢掉,公司不负任何责任。
3. In the process of using the induction door, please follow the danger sign of the induction door, and do not stay or play inside. Children should be accompanied by adults to pass quickly. The company will not be responsible for any direct or direct damage and loss caused by any misuse of the automatic revolving door.
4.任何擅自改装处理感应门本体的行为,或许会导致感应门受损无法正常运用,如在质保期会脱质保,如在维保期会脱维保。
4. Any unauthorized modification of the induction door body may cause the induction door to be damaged and unable to operate normally, such as the warranty period, and the maintenance period.
5.保证通电保养使用作业之前,应保证感应门门体内部空间没有异物以及机械电插锁翻开情况等全部阻遏门体作业的要素,以免出现问题。
5. Ensure that there are no foreign matters in the inner space of the induction door body, and that the mechanical electric latch is turned over and other factors that prevent the operation of the door body before the electrified maintenance operation, so as to avoid problems.
此外如果长期缺乏保养,造成感应门存在问题和小故障无法及时处理,它会从一个小故障变成一个大故障,这可能导致感应门的瘫痪,所以定期对其进行检查维护很重要,关注我们http://www.jnkdblgd.com了解更多事项!
In addition, if the lack of maintenance for a long time causes problems and small faults of the induction door that cannot be handled in time, it will change from a small fault to a major fault, which may lead to the paralysis of the induction door. Therefore, it is important to check and maintain it regularly. Pay attention to us http://www.jnkdblgd.com Learn more!