感应门可以说是我们比较常见的一种门了，在日常的使用中，让我们的出行变得更加智能更加便捷，解放双手，轻松出行。济南感应门厂家提醒您，要预防感应门时常会存在的9个问题!

The induction door can be said to be a common door. In daily use, it makes our travel more intelligent and convenient, hands free and easy. Jinan sensor door manufacturer reminds you to prevent 9 problems that often exist in sensor door!

1、电源不通，没有送电

1. No power supply

方法：重新送电。

Solution: Re power on.

2、处在锁门或常开

2. At the locked door or normally open

方法：将按到自动状态。

Solution: Press to automatic status.

3、存在断线

3. There is disconnection

方法：检查排除感应器、电控器、电机、光线，存疑的接线

Solution: check and eliminate the inductor, electric controller, motor, safety light and questionable wiring

4、光线失灵

4. Safety light failure

方法：解除光线接线，门就能正常运行，更新光线或电控器，同时排除其它存疑问题的部件。

Solution: Remove the safety light wiring, the door can operate normally, update the safety light or electric controller, and eliminate other parts with suspected problems.

5、感应器失灵

5. Sensor failure

方法：解除感应接线，按下“测试键”门都能正常运行后，同时排除其它存疑问题的部件后，更新电控器。

Solution: Remove the inductive wiring, press the "test key" and the door can operate normally. At the same time, update the electric controller after eliminating other components with problems.

6、电控器失灵

6. Electric controller failure

方法：解除感应接线，多次按下“测试键”门都不能正常运行后，检查相接电机的线。同时排除其它存疑问题的部件后，更新电控器。

Solution: Remove the induction wiring, and check the line connected to the motor after the door can not operate normally after pressing the "test key" for many times. At the same time, update the electronic controller after eliminating other components with problems.

7、电机失灵

7. Motor failure

方法：解除感应接线，多次按下“测试键”门都不能正常运行后，检查相接电机的线。更新电机，同时排除其它存疑问题的部件后。

Solution: Remove the induction wiring, and check the line connected to the motor after the door can not operate normally after pressing the "test key" for many times. After the motor is renewed and other suspected parts are eliminated.

8、由于外接其他门禁设备，发出错误信号

8. Error signal is sent due to external connection of other access control equipment

方法：解除门禁接线，多次按下“测试键”，门正常运行时，要检修或更新联接的门禁设备。

Solution: Remove the access control wiring, press the "test key" for many times, and when the door is in normal operation, repair or update the connected access control equipment.

9、门体卡住

9. The door body is stuck

方法：检查门体结构变形情况，检查损坏承重部件情况，重新加固或更新部件。

Solution: check the deformation of the door structure, check the damage to the load-bearing parts, and re reinforce or renew the parts.

感应门机柜内要保持干净，以防杂质、尘埃损害路轨及动滑轮，危害金属件的使用期。另外须技术工作人员清洁路轨上的浮灰，增多自动感应门的使用期及降低噪音。关注我们http://www.jnkdblgd.com，了解更多！

The inside of the induction door cabinet shall be kept clean to prevent impurities and dust from damaging the track and moving pulley and endangering the service life of the metal parts. In addition, the technical staff shall clean the floating ash on the track, increase the service life of the automatic sensing door and reduce the noise. Follow us http://www.jnkdblgd.com , learn more!