您好,欢迎访问济南凯轩鹏宇玻璃有限公司 网站

全国咨询热线:

400-9968-996

当前位置:首页>新闻资讯>行业动态装置肯德基门有哪些地方要留意?

装置肯德基门有哪些地方要留意?

文章出处:http://www.jnkdblgd.com/ 人气: 0 发表时间:2022-09-05
肯德基门靠其时髦的外观、防尘防噪、巩固耐用等优势征服了很多客户。装置济南肯德基门需求留意一些小细节。
KFC door has conquered many customers by virtue of its fashionable appearance, dust-proof and noise proof, solid and durable. The installation of Jinan KFC gate requires attention to some small details.
1、装置次序。装置肯德基门时,次序不能乱,避免呈现装好在拆的状况。
1. Device sequence. When installing KFC doors, the order should not be disordered, so as to avoid the situation of being installed and being disassembled.
2、玻璃密封条。装玻璃密封条时,应该留有弹性余量,避免装置时呈现问题。
2. Glass sealing strip. When installing the glass sealing strip, there should be elastic allowance to avoid problems during installation.
3、门的地轴要固定好。门的地轴固定好后,为了保证巩固度,有必要要等水泥干了今后再进行下一步。
3. The floor shaft of the door should be fixed. After the floor shaft of the door is fixed, it is necessary to wait for the cement to dry before proceeding to the next step in order to ensure the consolidation.
4、门的整理。肯德基门装置完结今后,为了避免划伤门以及灰浆污物等粘附在肯德基门外表,整理的东西要留意,使用专门的溶剂、棉纱清洗。还有不要让门洞或门缝里留不应留的东西。
4. Arrangement of doors. After the KFC door installation is completed, in order to avoid scratching the door and mortar dirt adhering to the KFC door surface, pay attention to the things sorted out, and use special solvents and cotton yarn to clean them. And don't leave anything that shouldn't be left in the door hole or crack.
5、抹润滑油。装门前,地轴上抹一点润滑油能够让门扇开合自如,然后添加运用寿命。
5. Apply lubricating oil. Before installing the door, a little lubricating oil on the floor shaft can make the door leaf open and close freely, and then add service life.
6、螺丝要拧紧。肯德基门装置时螺丝要千万要拧紧,不然门会松动。
6. The screws should be tightened. When installing the KFC door, the screws must be tightened, otherwise the door will become loose.
济南肯德基门
注意:
be careful:
要做好核对和检查工作,核对型号、规格、数量是否符合要求;拼樘构件、五金零件、安装铁脚和紧固零件的品种、规格、数量是否正确和齐全。
Check and check whether the model, specification and quantity meet the requirements; Whether the variety, specification and quantity of splicing components, hardware parts, mounting iron feet and fastening parts are correct and complete.
安装彰,应逐樘确认完好,如门窗框变形,或窗角、窗梃、窗心有脱焊、松动等现象,需要行修复再安装。
If the door and window frames are deformed, or the window corners, mullions and cores are desoldered or loose, repair them before installation.
核对图纸要求的门窗洞口上弹出水平、垂直控制线是否画好。保证肯德基门在安装过程中的位置、尺寸、标高准确无误。
Check whether the horizontal and vertical control lines snapped on the door and window openings required by the drawings are well drawn. Ensure that the position, size and elevation of KFC door during installation are correct.
肯德基门尽量不使用吊起的方式,如需吊起运输需要平稳牢固的着力点,在落的时候也需要特别注意。切记不可使用棍棒等工具穿入窗心或窗梃起或杠抬,更不能使用抛、摔等危险的方式。关注我们http://www.jnkdblgd.com,了解更多!
KFC doors should not be hoisted as far as possible. If they need to be hoisted, they need stable and firm points of strength, and they also need special attention when falling. Remember not to use sticks and other tools to penetrate into the window core or stiles or lift them with bars, and not to use dangerous methods such as throwing and falling. Follow us http://www.jnkdblgd.com Yes, learn more!