您好,欢迎访问济南凯轩鹏宇玻璃有限公司 网站

全国咨询热线:

400-9968-996

当前位置:首页>新闻资讯>行业动态自动感应门无感应物体时自行开启的原因

自动感应门无感应物体时自行开启的原因

文章出处:http://www.jnkdblgd.com/ 人气: 0 发表时间:2022-11-23
自动感应门不停的自动开关故障是一种比较常见的自动门故障,这种故障是严重影响了所安装自动感应门进出人员的通行,长时间的济南感应门不停自动开关还会引发其它故障,且有很大的隐患,除此执之外,自动感应门无感应物体时自行开启的原因是怎样的?
The continuous automatic opening and closing failure of the automatic induction door is a relatively common failure of the automatic door. This failure seriously affects the passage of the installed automatic induction door. The continuous automatic opening and closing of the Jinan induction door for a long time will also lead to other failures, and there is a great potential safety hazard. In addition, what is the reason for the automatic induction door to open automatically when there is no inductive object?
1.感应器调整不当:检查感应器调整钮将感测角度调小。
1. Incorrectly adjusted sensor: check the sensor adjusting button to reduce the sensing angle.
2.感测区有异物:感测区内存在移动物体,将该物体移开。
2. Foreign matters in the sensing area: if there is a moving object in the sensing area, move the object away.
3.机箱盖固定不良:检查机箱盖螺丝是否锁紧,重新固定。
3. Poor fixing of the chassis cover: check whether the chassis cover screws are locked and re fix them.、
http://www.jnkdblgd.com
4.室外感测环境不良:检查室外环境,改用其他感测方式开启门扇。
4. Poor outdoor sensing environment: check the outdoor environment and open the door leaf with other sensing methods.
5.感应器调节不当:检查感应器调整钮,将关门速度调慢。
5. Incorrectly adjusted sensor: check the sensor adjustment button and slow down the door closing speed.
6.感应器故障:检查感应器是否误动作,对其进行调整,损坏更换感应器。
6. Sensor failure: check whether the sensor acts wrongly, adjust it, and replace the sensor if it is damaged.
那么这个让广大自动感应门使用者烦恼的故障问题是怎样引起的呢?又该如何维修处理呢?以上内容中就讲解到了信息内容,大家都有什么问题的话http://www.jnkdblgd.com可以实际上来看看看!
So how did this trouble trouble most users of automatic induction doors? How to repair? The information content is explained in the above content. If you have any questions http://www.jnkdblgd.com You can actually look at it!