全国咨询热线

行业新闻

当前位置:首页 - 新闻资讯 > 行业新闻 >

办公室玻璃隔断墙的钉固法安装!

来源:http://www.jnkdblgd.com 日期:2019-07-30 发布人:admin
在办公室玻璃隔断安装的过程中,装修业主很关注其施工工艺和安装过程。在面对玻璃隔断装修时,其实有多种安装方法,今天济南玻璃隔断就为大家介绍的就是其中一种钉固法安装。
In the process of glass partition installation in the office, the decoration owner pays close attention to its construction technology and installation process. In the face of glass partition decoration, there are actually a variety of installation methods. Today, Jinan glass partition is introduced to you is one of the nailing method of installation.
玻璃隔断钉固法安装要求墙面处理平整,无鼓肚、凸凹不平现象,若墙面平整度好就可以直接用于安装;否则,可用水泥砂浆(如能加入适量防潮粉效果更佳),刮抹找平一遍。
Installation of glass partition nailing requires smooth wall treatment without bulging or bumping. If the wall is smooth enough, it can be directly used for installation. Otherwise, cement mortar can be used (if appropriate moisture-proof powder can be added, the effect is better) to scrape and leveling once.
排孔打眼,每块玻璃都需要钻出四个安装固定孔,孔位应均匀分布,不能太靠近玻璃的边缘,以防开裂。现在市场上出售的定型墙面玻璃隔断一般都已经打好了安装孔,非定型玻璃隔断可以在专业加工点打孔。
Each piece of glass needs to drill four fixing holes. The holes should be evenly distributed and not too close to the edge of the glass to prevent cracking. Now the fixed wall glass partition sold on the market has generally been drilled installation holes, non-shaped glass partition can be drilled in professional processing points.
办公室玻璃隔断安装应先在墙上弹好线,然后再把玻璃隔断摆放在墙的相应位置,通过玻璃上的孔洞标出,在墙上的相应孔位,挪开玻璃,用电钻或电锤在墙上标出的位置打孔,孔径应根据选用的螺钉尺寸来确定,一般以小于螺钉端头直径3毫米为宜。
Installation of office glass partition should first play a good line on the wall, then place the glass partition in the corresponding position of the wall, mark the holes on the glass, remove the glass, drill or hammer the holes on the wall, the hole size should be determined according to the selected screw size, generally smaller than or equal to the size of the screw. The diameter of the screw end is 3 mm.
济南玻璃隔断
安装玻璃前,应在玻璃背面粘贴一层牛皮纸保护层。具体方法是,先在玻璃的背面涂刷一层乳白胶,再把一张牛皮纸粘贴在镜的背面,再用塑料板刮平整。在墙上打好的孔内预埋塑料膨胀螺栓,把玻璃对好孔就位,用螺钉固定好,对角拧紧,以玻璃平稳无晃动为宜。
Before installing glass, a protective layer of kraft paper should be pasted on the back of the glass. The specific method is to apply a layer of latex on the back of the glass, then paste a kraft paper on the back of the mirror, and then scrape it flat with a plastic plate. The plastic expansion bolt is embedded in the hole punched on the wall. The glass is positioned in the right place, fixed with screw and tightened diagonally. It is better to keep the glass stable without shaking.
封闭四周玻璃安装固定好后,为了防止潮气侵入玻璃背后,影响玻璃隔断的使用寿命和质量,应该用嵌缝膏把玻璃和墙之间的缝隙嵌填密实。
After fixing the glass around the seal, in order to prevent moisture from intruding into the back of the glass and affecting the service life and quality of the glass partition, the gap between the glass and the wall should be filled with seam paste.
以上的内容就是由济南玻璃隔断为大家介绍的相关内容了,如果您有更多的意见和想法,欢迎在线留言:http://www.jnkdblgd.com我们后续会有专人与您对接!
If you have more comments and ideas, please leave a message online: http://www.jnkdblgd.com, we will have someone to connect with you later!

上一篇:办公室玻璃隔断装修时需要考虑的问题!
下一篇:玻璃隔断应如何选材?